All Eyes on Printed Electronics
June 2008 – Printed and potentially printed electronics was first seen as a way of sharply reducing the cost of everything from lighting to personal electronics.
That remains an objective. However, it is also proving to be a way of providing electronic and electrical devices that were previously impossible to manufacture. This includes transparent displays, transistors, lighting, loudspeakers, photovoltaics, sensors and batteries. There are devices working in the terahertz band and very wide area devices such as sensors, ac electroluminescent and other displays and photovoltaics. And they are increasingly deposited on top of each other. This is leading to components and products that can re-invigorate the following markets:
Sector Global market $ billion Conventional electronics 1,300 Packaging 430 Silicon chip 280 Publishing 200 Electronic displays 120 Lighting 65 Cosmetics 40 Sensors 30 Photovoltaics 15 Source: Industry statistics
Little wonder, then, that analysts see printed electronics rising exponentially to around $300 billion in twenty years’ time, with the demand for conductive inks alone reaching several billion dollars yearly in little more than five years from now. Little wonder that over 1500 organisations across the world are now doing major work in this area, about half of them being academic. That is about twice the level of interest and investment of only three years ago and it goes beyond the well publicised organic electronics – indeed, half the materials being developed and used for printed electronics are inorganic. The number of patents in all aspects is sharply increasing as giant corporations down to start-ups announce a raft of exciting new inventions.
Perhaps the elements of that emerging market will become as shown below. Here there are echos of how the silicon chip became the largest part of today’s traditional electronics market.The conventional silicon chip is hitting the buffers. Major problems include the cost of the research and development supporting improved production rising exponentially and the cost of silicon factories rising exponentially. This is what Professor Neil Gershenfeld of Massachusetts Institute of Technology calls the Inverse Moore’s law. Making small quantities of chips is already very expensive and design and production changes are very slow and expensive. The next step down in transistor size (to reduce cost and provide cleverer circuits) results in short life of the chip. In addition, making chips ever smaller means you cannot subsume large components such as displays, batteries, antennas, microphones etc. They cannot be put on top of the tiny chip so they all have to be connected alongside thus creating something big and unreliable. Printed electronics can get over almost all of these problems but it can also take us into a new world.
Here we have the magic of the new metamaterials, with their negative refractive index and other surreal properties promising previously impossible devices, from the cloak of invisibility to unusually small RFID labels. For example, some metamaterials are flexographically printed to give the necessary microscopic three dimensional patterns over a wide area, such as split ring resonators on microwires. We now have the reduction in melting point of metals by a factor of ten achieved by printing them in particles of only a few nanometers across. They can then be annealed on something as delicate as acetate film. What are the new products soon to be launched in biodegradable paper electronics and in electrophoretics where the display uses no electricity until it is changed? The leaders are being eagerly followed as they push the boundaries forward, from tightly rollable electronics and power to edible electronics.Development of exciting new materials is central to this revolution, there being rapid advances in performance thanks to the new nanosilicon semiconductors in printed transistors and photovoltaics, new organic materials printed in the form of batteries, inorganic compounds both as semiconductors and as photovoltaic films, some of which work off heat as well as light. Will printed copper finally replace the printed silver used in everything from touchpads and testers on Duracell batteries to smart skin patches for drug delivery? Where will the new concept of origami electronics take us beyond the foldable two meter disco light shown below? Packaging that is refolded after use into a useful electronic or electrical product is one hot idea for brand enhancement while enhancing environmental credentials.
The end result is the replacement of billboards, posters and books with reprogrammable printed electronic film. Smart packaging will inform, prompt, warn and entertain and record when you took you pills thanks to printed logic, moving colour displays, light, sound and electronically triggered aromas. Medical test instruments will become everyday disposables kept in your pocket. The move of healthcare from hospital to home and on the move is also facilitated with printed diagnostic patches and other affordable inventions. The effects can be multiplied when electronics and electrics are printed onto smart substrates. These include self healing plastic recently developed in France and “Polymer based Ultrasonic Paper PUP” from ITRI Taiwan. Physiotherapy and large area motion detectors are envisaged that will use the latter. Polymers have recently been demonstrated that change electric properties when stretched and electroactive polymers change shape under electrical bias.
The exciting new frontiers of science and product development will be aired at the conference “Printed Electronics Asia” in Tokyo Japan on October 8-9. There will be visits to local centres of excellence in printed electronics, optional Masterclasses and an exhibition. This truly global event will be double the size of last year’s meeting, reflecting the burgeoning interest in the subject. Once again, it will be universal in coverage, giving equal emphasis to both inorganic and organic materials and devices. The best speakers will fly in from all over the world. For example, there will be presentations from Kodak, Toppan Forms, Sony and the University of Cambridge in the UK where light emitting polymers were first discovered. We shall hear from e-ink of the USA, Samsung of Korea, Thin Film Electronics of Sweden, with its printed organic mega memory and NXT of the UK with its transparent film loudspeakers. Waseda University of Japan will give the latest on its new translucent organic batteries deposited on polymer film and the latest research at the Institute of Materials Research and Engineering and display leader Bridgestone in Japan will be presented.
A further stream of new products will be revealed by the University of Tokyo and Toppan Forms. Hitachi of Japan, H.C.Starck of Germany and other experts will discuss their remarkable advances in materials and production machinery will also be covered. Kovio will come from California to present on how their ink jet printed nanosilicon transistor circuits can meet silicon chip specifications at a fraction of the cost.